French  German  English  Spanish
  French  German  English  Spanish
CustomerLogin
  Minimize

Fabrication Info and Tech Tips

Lever Release Kit Fabrication
Now Available As An Option!

Assembly Instructions for the Handle Portion of the Cable Release

  1. Thread the 1/4-28 set screw (4) into the hollow handle (5) until it bottoms out
  2. Insert the cable (3) into the small hole in the cap (2), then, loop it around and back out the same hole
  3. Insert the 6-32 screw (1) through the back of the cap and the center of the loop of cable
  4. Thread the 6-32 screw into the set screw (4)
  5. Adjust the tension of the cable as necessary, then tighten the screw
  6. Add stop set screw (6) to proximal section to prevent the cam from staying in the unlocked position
InterLock

 Print  
  Minimize
 Print  
┬ęCopyright 2011 by WSI
Created by WSI
This site is optimized for Netscape 4.0 and Internet Explorer 5.0 or higher. Please download an updated version